|
|
Post by adr on Dec 27, 2019 15:52:20 GMT -7
Rumor has it that Colt will bring the iconic Python revolver back for 2020. Attached is a picture and it does look like a new version-- the hammer appears different, the grips are updated along with manual and marketing materials. Don't know about $$$$ but I'm sure it will be pricey. It will probably get rolled out at the upcoming g SHOT Show in January.  |
|
|
|
Post by adr on Jan 1, 2020 20:10:15 GMT -7
|
|
|
|
Post by roadking on Jan 5, 2020 19:19:55 GMT -7
What do you think will happen to the value of the originals that could easily fetch 4k?
|
|
|
|
Post by adr on Jan 5, 2020 20:06:29 GMT -7
IMO not much impact. The new generation Python has a redesigned action with MIM parts so on the outside its nearly identical but the interior is different. Less moving parts that are CNC machined which don't require hand fitting like the original guns. There are four generations of Colt Single Action Army revolvers and each generation had some manufacturing and design changes which are reflected in price points for each generation. So i believe the first generation Python (1955-2000) which were virtually hand built and fitted will retain most of their current value.
IMO the new Python will be a better shooting gun, I'm told the double action is real nice without any "stacking" that older Colt's are known for. And fans of the TV series "The Walking Dead" are all waiting to get a copy. Colt will sell as many as they can make.
|
|
|
|
Post by adr on Jan 6, 2020 15:06:42 GMT -7
|
|
|
|
Post by manofsteel on Jan 8, 2020 14:27:45 GMT -7
You did not let me down adr, I knew if anyone would have their pulse on this it would be you. I am looking at getting one to shoot steel challenge with, would you suggest the 4" or 6" model? I have a Smith 627 pro series 8 shot 357 with a 4" barrel and really like it but not sure what I am gaining or missing by going with a longer barrel (if I went with the 6" model)? At first glance, I am digging the 4" model though....
|
|
|
|
Post by adr on Jan 8, 2020 18:06:57 GMT -7
I've had several Colt Pythons--currently, I have a blue steel 6 inch made in 1972 and a real cool custom version -- a "Smython" or "Smolt" which is a S&W L Frame with a 4 inch Python barrel. The 6 inch Python I used in NRA Action Pistol -- Production Division where the longer sight radius helps when shooting the 50 yard stage in the Practical, the 35 yard stage in the Barricade. Very accurate -- I fired a clean score on the Falling Plates at the Virginia State Championship ten years ago with my 6 inch version.
The first generation Pythons are the "Rolls Royce" of revolvers-- virtually hand assembled by skilled craftsmen and when compared to a Smith and Wesson, the "lockwork" of a Python is rather complex and finicky to work on. They also have IMO, an exaggerated tendency to go "out of time" faster than other revolvers. I've never experienced that problem with my Python and it has seen a lot of use in practice and competition.
The new generation Python is a simpler and stronger design with fewer moving parts and thats a good thing. It still uses a leaf style mainspring and thats good too. There is a lot of 'new and improved" with the new Python and it should be a solid piece for shooting pleasure in leisure and competition-- plus it looks just like the first generation gun--all steel and walnut.
For Steel Challenge Shooting --IMO the 4 inch Python is a bit faster out of a traditional holster and as you know "time to first shot" is important on every string fired. Your current S&W 627 8 shot is ideal for Steel Challenge giving you some extra insurance for make up shots. Shooting a 6 shot revolver like a Python only gives you one extra shot if needed but I'm more inclined to shoot the stages "clean" and focus on fundamentals over raw speed. The 6 inch Python may be slower out of a traditional holster but it gives you more sight radius which is more forgiving of sight alignment error at the longer distances.
|
|
|
|
Post by manofsteel on Jan 9, 2020 8:19:12 GMT -7
That is a great explanation. Lots of things to consider. Maybe I should lean towards the 6" since I have a 4" revolver already. And for shooting NRA action pistol since its just a 6 shot string it would work great.
Do you find that a 4" barrel has more muzzle flip over a 6" or would it be the other way around for shooting 1 handed?
P.S. found a picture of the "Smython" WOW that loots pretty sexy.
|
|
|
|
Post by adr on Jan 9, 2020 11:49:00 GMT -7
I'd go with a 6 inch. More weight and longer sight radius. Shooting .38 Special at 120 PF hardly any muzzle flip/recoil.
|
|
