|
|
Post by jc91087 on Apr 6, 2020 9:37:50 GMT -7
I filed down my slide release and need to coat the bare metal. Does anyone have any suggestions that might work?
|
|
|
|
Post by tom on Apr 6, 2020 12:35:23 GMT -7
If you aren't into that ceracoting stuff, I would rattle-can it with some high-temp paint you use on engine blocks, sand for smoothness, recoat as necessary, and have a coke. Edit to add: For reference, the fluted part of this barrel was painted that way 6 or 7 years ago. imgur.com/a/uRmFAV6 |
|
|
|
Post by Admin on Apr 6, 2020 16:03:48 GMT -7
I filed down my slide release and need to coat the bare metal. Does anyone have any suggestions that might work? For small things like this I just use instant blue. Clean the part well with alcohol, warm it up with a hair dryer, give it a couple swabs let it dry and the coat it with gun oil. Never gets blue like original but then I am not fussy about it. Good luck... |
|
|
|
Post by jc91087 on Apr 7, 2020 10:10:22 GMT -7
Thanks. I'll give those a try.
|
|
