Post by adr on Dec 18, 2020 8:27:39 GMT -7
ATF just released this in the Federal Register. Titled "Objective Factors for Classifying Weapons with “Stabilizing Braces” --its open for public comment. Why is this being released over the holiday period when most employees in the shooting industry are on break and with such a short public comment window (today through January 4)?? After all there are over 4 million "Stabilizing Braces" in circulation.
www.federalregister.gov/documents/2020/12/18/2020-27857/objective-factors-for-classifying-weapons-with-stabilizing-braces
"Consequently, following issuance of this notice, ATF and DOJ plan to implement a separate process by which current possessors of affected stabilizer-equipped firearms may choose to register such firearms to be compliant with the NFA. As part of that process, ATF plans to expedite processing of these applications, and ATF has been informed that the Attorney General plans retroactively to exempt such firearms from the collection of NFA taxes if they were made or acquired, prior to the publication of this notice, in good faith. This separate process may include the following options: registering the firearm in compliance with the NFA (described above), permanently removing the stabilizing brace from the firearm and disposing of it, replacing the barrel of the firearm (16” or greater for a rifle, or 18” or greater for a shotgun), surrendering the firearm to ATF, or destroying the firearm."
How to Comment
ATF is accepting comments from all interested persons on the use of the objective factors listed in this document. All comments must reference this document's docket number, ATF 2020R-10, be legible, and include the commenter's complete first and last name and full mailing address. ATF will not consider, or respond to, comments that do not meet these requirements or comments containing excessive profanity. Comments that do not meet these criteria will not be considered. ATF will retain anonymous comments and those containing excessive profanity as part of this administrative record, but will not publish such documents on www.regulations.gov. ATF will treat all comments as originals and will not acknowledge receipt of comments. In addition, if ATF cannot read your comment due to technical difficulties and cannot contact you for clarification, ATF may not be able to consider your comment.
ATF will make all comments meeting the requirements of this section, whether submitted electronically or on paper, available for public viewing at ATF and on the internet through the Federal eRulemaking Portal, and subject to the Freedom of Information Act (5 U.S.C. 552). Commenters who do not want their name or other personal identifying information posted on the internet should submit comments by mail or facsimile, along with a separate cover sheet containing their personal identifying information. Both the cover sheet and comment must reference this docket number (2020R-10). For comments submitted by mail or facsimile, information contained on the cover sheet will not appear when posted on the internet but any personal identifying information that appears within a comment will not be redacted by ATF and it will appear on the internet.
A commenter may submit to ATF information identified as proprietary or confidential business information. The commenter shall place any portion of a comment that is proprietary or confidential business information under law on pages separate from the balance of the comment with each page prominently marked “PROPRIETARY OR CONFIDENTIAL BUSINESS INFORMATION” at the top of the page.
ATF will not make proprietary or confidential business information submitted in compliance with these instructions available when disclosing the comments that it received, but will disclose that the commenter provided proprietary or confidential business information that ATF is holding in a separate file to which the public does not have access. If ATF receives a request to examine or copy this information, it will treat it as any other request under the Freedom of Information Act (5 U.S.C. 552). In addition, ATF will disclose such proprietary or confidential business information to the extent required by other legal process.
Submit comments in any of three ways (but do not submit the same comment multiple times or by more than one method). Hand-delivered comments will not be accepted.
Federal eRulemaking Portal: ATF recommends that you submit your comments to ATF via the Federal eRulemaking portal at www.regulations.gov and follow the instructions. Comments will be posted within a few days of being submitted. However, if large volumes of comments are being processed simultaneously, your comment may not be viewable for up to several weeks. Please keep the comment tracking number that is provided after you have successfully uploaded your comment.
Mail: Send written comments to the address listed in ADDRESSES section of this document. Written comments must appear in minimum 12-point font size (.17 inches), include the commenter's first and last name and full mailing address, be signed, and may be of any length.
Facsimile: Submit comments by facsimile transmission to (202) 648-9741. Faxed comments must:
1. Be legible and appear in minimum 12-point font size (.17 inches);
2. Be 8 1/2″ x 11″ paper;
3. Be signed and contain the commenter's complete first and last name and full mailing address; and
4. Be no more than five pages long.
www.federalregister.gov/documents/2020/12/18/2020-27857/objective-factors-for-classifying-weapons-with-stabilizing-braces
"Consequently, following issuance of this notice, ATF and DOJ plan to implement a separate process by which current possessors of affected stabilizer-equipped firearms may choose to register such firearms to be compliant with the NFA. As part of that process, ATF plans to expedite processing of these applications, and ATF has been informed that the Attorney General plans retroactively to exempt such firearms from the collection of NFA taxes if they were made or acquired, prior to the publication of this notice, in good faith. This separate process may include the following options: registering the firearm in compliance with the NFA (described above), permanently removing the stabilizing brace from the firearm and disposing of it, replacing the barrel of the firearm (16” or greater for a rifle, or 18” or greater for a shotgun), surrendering the firearm to ATF, or destroying the firearm."
How to Comment
ATF is accepting comments from all interested persons on the use of the objective factors listed in this document. All comments must reference this document's docket number, ATF 2020R-10, be legible, and include the commenter's complete first and last name and full mailing address. ATF will not consider, or respond to, comments that do not meet these requirements or comments containing excessive profanity. Comments that do not meet these criteria will not be considered. ATF will retain anonymous comments and those containing excessive profanity as part of this administrative record, but will not publish such documents on www.regulations.gov. ATF will treat all comments as originals and will not acknowledge receipt of comments. In addition, if ATF cannot read your comment due to technical difficulties and cannot contact you for clarification, ATF may not be able to consider your comment.
ATF will make all comments meeting the requirements of this section, whether submitted electronically or on paper, available for public viewing at ATF and on the internet through the Federal eRulemaking Portal, and subject to the Freedom of Information Act (5 U.S.C. 552). Commenters who do not want their name or other personal identifying information posted on the internet should submit comments by mail or facsimile, along with a separate cover sheet containing their personal identifying information. Both the cover sheet and comment must reference this docket number (2020R-10). For comments submitted by mail or facsimile, information contained on the cover sheet will not appear when posted on the internet but any personal identifying information that appears within a comment will not be redacted by ATF and it will appear on the internet.
A commenter may submit to ATF information identified as proprietary or confidential business information. The commenter shall place any portion of a comment that is proprietary or confidential business information under law on pages separate from the balance of the comment with each page prominently marked “PROPRIETARY OR CONFIDENTIAL BUSINESS INFORMATION” at the top of the page.
ATF will not make proprietary or confidential business information submitted in compliance with these instructions available when disclosing the comments that it received, but will disclose that the commenter provided proprietary or confidential business information that ATF is holding in a separate file to which the public does not have access. If ATF receives a request to examine or copy this information, it will treat it as any other request under the Freedom of Information Act (5 U.S.C. 552). In addition, ATF will disclose such proprietary or confidential business information to the extent required by other legal process.
Submit comments in any of three ways (but do not submit the same comment multiple times or by more than one method). Hand-delivered comments will not be accepted.
Federal eRulemaking Portal: ATF recommends that you submit your comments to ATF via the Federal eRulemaking portal at www.regulations.gov and follow the instructions. Comments will be posted within a few days of being submitted. However, if large volumes of comments are being processed simultaneously, your comment may not be viewable for up to several weeks. Please keep the comment tracking number that is provided after you have successfully uploaded your comment.
Mail: Send written comments to the address listed in ADDRESSES section of this document. Written comments must appear in minimum 12-point font size (.17 inches), include the commenter's first and last name and full mailing address, be signed, and may be of any length.
Facsimile: Submit comments by facsimile transmission to (202) 648-9741. Faxed comments must:
1. Be legible and appear in minimum 12-point font size (.17 inches);
2. Be 8 1/2″ x 11″ paper;
3. Be signed and contain the commenter's complete first and last name and full mailing address; and
4. Be no more than five pages long.