Post by jc91087 on Jun 8, 2015 17:48:22 GMT -7
Well I finally decided to get serious about competing and decided to get a dedicated competition gun. I figured that since my carry gun is the Glock 19 I would stay within the Glock family so I picked up a new Glock 34 Gen 4.
Of course I couldn't leave it stock and I just about ended up replacing everything in the gun. I have the trigger down to a smooth 4# pull with very little pre-travel and a short reset. I can get the pull even lighter but I'm keeping it above 3.5# so I stay legal for production in NRA Action Pistol.
KKM Barrel
Zev Stainless Firing Pin Safety Plunger
Zev magwell insert
Zev Stainless Steel Guiderod with 13# Spring
Tarran Tactical Connector
Zev Trigger Spring
Zev V4 Extended Striker (I wanted to replace this because the stock striker in my 19 broke in practice the day before the Bianchi Cup)
WOTG "Special" Striker Spring
Gen3 Trigger Bar
Dawson Precision Adjustable Rear with All Black Front
Standard Slide Release (I was causing malfunctions with my support hand hitting the extended slide release)
I was able to sight the gun in today, and while I had some issues with the tight chamber of the KKM barrel, I was finally able to get it dialed in at 25 yards using the bench as a rest. The target I was using had a 3" black circle as the aiming point.
I look forward to seeing what I can do with it. However, I'll miss the excuse of shooting a 4" gun as to why I missed shots at longer ranges...
Of course I couldn't leave it stock and I just about ended up replacing everything in the gun. I have the trigger down to a smooth 4# pull with very little pre-travel and a short reset. I can get the pull even lighter but I'm keeping it above 3.5# so I stay legal for production in NRA Action Pistol.
KKM Barrel
Zev Stainless Firing Pin Safety Plunger
Zev magwell insert
Zev Stainless Steel Guiderod with 13# Spring
Tarran Tactical Connector
Zev Trigger Spring
Zev V4 Extended Striker (I wanted to replace this because the stock striker in my 19 broke in practice the day before the Bianchi Cup)
WOTG "Special" Striker Spring
Gen3 Trigger Bar
Dawson Precision Adjustable Rear with All Black Front
Standard Slide Release (I was causing malfunctions with my support hand hitting the extended slide release)
I was able to sight the gun in today, and while I had some issues with the tight chamber of the KKM barrel, I was finally able to get it dialed in at 25 yards using the bench as a rest. The target I was using had a 3" black circle as the aiming point.
I look forward to seeing what I can do with it. However, I'll miss the excuse of shooting a 4" gun as to why I missed shots at longer ranges...
