|
|
Post by solostyle on Aug 3, 2014 13:51:06 GMT -7
I been having some issues with the jackets being shaved while seating them, i have a pretty good debur and chamfer but come across it now and again,any suggestion would be greatly appreciated.
|
|
|
|
Post by rbglock on Aug 4, 2014 16:01:40 GMT -7
Try A VLD (Very Low Drag) De-burring Tool. They Work Great For Me.
|
|
|
|
Post by wychild on Aug 12, 2014 4:39:48 GMT -7
you didn't say weather these are for a pistol or rifle, if they are for pistol then it sounds as if you are not belling the case enough.
|
|
|
|
Post by solostyle on Aug 13, 2014 17:35:07 GMT -7
Rifle
|
|
|
|
Post by solostyle on Aug 13, 2014 17:38:34 GMT -7
you didn't say weather these are for a pistol or rifle, if they are for pistol then it sounds as if you are not belling the case enough. Your right i didnt say but they are rifle projectiles,Karl is that you this is Donovan |
|
|
|
Post by wychild on Aug 15, 2014 14:31:08 GMT -7
yes,that me Donovan. what style of bullet are they are flat base
or boat tail? In either case it sounds like the case is not lining up with the die correctly this may be caused by the case holder not inserted into the press ram far enough something caught in the notch or the the case holder its self making the case offset to the die. Another possibility could be dirt in the die its self causing the bullet to tilt
|
|
